Add a purpose and conclusion. Were we trying to demonstrate something? Did we succeed?
I think I've got it where I want it with respect to the calculations I'd like you to make. The extra lab credit is unusual in that it will be applied to your lab grade directly.
http://h1.ripway.com/DrCherdack/ferryman%209-10.doc
Wednesday, September 29, 2010
Torque on Honors Test
Since we have covered torque in class and especially in our labs, it is reasonable find out what you learned about it. If you can handle problems of the level of difficulty (not necessarily the same type) of question 6 on your torque lab, you should be okay.
There is a post discussing question 6 in you lab from last Sunday. It might help you.
There is a post discussing question 6 in you lab from last Sunday. It might help you.
Forces on Objects and Systems
Notes on Forces
A) Note that any single object, call it object A, is affected only by the forces acting directly on it including only contact forces (such as from ropes or table tops)and field forces( such as gravity. This means that only forces from objects in contact with object A or producing a field such as gravitational or electrostatic, which interacts with it, can directly cause object A to accelerate.
For example, without taking into account air resistance and other minor effects, the acceleration of an object hanging from a cable is affected by only two forces, the tension in the cable and gravity. Similarly, the tension in the cable where it is attached to the object can be found by considering only the acceleration of the object and the other force on the object and keeping in mind the respective directions of the forces and of the acceleration.
B) Objects in a system linked together in a way so that they all accelerate and move together can be treated in a sense as a single object with a single mass equal to the sum of the masses in the system and accelerated only by external forces. The forces internal to this system cancel each other as far as accelerating the total mass is concerned. This is because the force of one object in the system on a second object in the system is equal and opposite to the to the force of the second object on the first. Thus they make no contribution to the net force on the system as a whole.
However, once you have you used the external forces on the system and the total mass of the system to help you establish the acceleration of the entire system, and thus each object in the system, go back to Note A above to find the internal forces such as tensions in a cable connecting two objects in the system.
A) Note that any single object, call it object A, is affected only by the forces acting directly on it including only contact forces (such as from ropes or table tops)and field forces( such as gravity. This means that only forces from objects in contact with object A or producing a field such as gravitational or electrostatic, which interacts with it, can directly cause object A to accelerate.
For example, without taking into account air resistance and other minor effects, the acceleration of an object hanging from a cable is affected by only two forces, the tension in the cable and gravity. Similarly, the tension in the cable where it is attached to the object can be found by considering only the acceleration of the object and the other force on the object and keeping in mind the respective directions of the forces and of the acceleration.
B) Objects in a system linked together in a way so that they all accelerate and move together can be treated in a sense as a single object with a single mass equal to the sum of the masses in the system and accelerated only by external forces. The forces internal to this system cancel each other as far as accelerating the total mass is concerned. This is because the force of one object in the system on a second object in the system is equal and opposite to the to the force of the second object on the first. Thus they make no contribution to the net force on the system as a whole.
However, once you have you used the external forces on the system and the total mass of the system to help you establish the acceleration of the entire system, and thus each object in the system, go back to Note A above to find the internal forces such as tensions in a cable connecting two objects in the system.
To those interested in medicine.
There is a program for doing something like internships with doctors over the summer. I don't know much about it other than some of my students in the past thought it worthwhile. It is expensive but some aid may be available. If you are interested let me know by email and put NYLF in the subject line.
Tuesday, September 28, 2010
Honors Assignment and Quiz
This assignment for tonight should reinforce what we accomplished in the last two days:
http://h1.ripway.com/DrCherdack/Worksheet%20F9-92-09.doc
Get all your force homework up to date. You should fix everything turned in so far, but you don't have turn it in again.
The quiz is this Thursday.
http://h1.ripway.com/DrCherdack/Worksheet%20F9-92-09.doc
Get all your force homework up to date. You should fix everything turned in so far, but you don't have turn it in again.
The quiz is this Thursday.
Honors Lab on a=F/M
1) It has been pointed out to me that I never defined mechanics. While this is an overstatement, I'll say here that mechanics is the study of forces and their effects, on bodies, and structures. Mechanics quantities include position, velocity, acceleration, force, mass, etc.
2) Item 9 in the lab sheet asks you to use your graphs to find out if the purpose of the lab has been accomplished. Ignore all the words in parenthesis, they are from an earlier version.
2) Item 9 in the lab sheet asks you to use your graphs to find out if the purpose of the lab has been accomplished. Ignore all the words in parenthesis, they are from an earlier version.
AP Relative Motion Sheet
Here is the revised Relative Motion WS. Use this tonight.
http://h1.ripway.com/DrCherdack/Relative%20Mot%20WS%20RM9-09.doc
Here is a key correction to problem 6 from this new version that corrects the error in the old work sheet
6. A ball is thrown from a car heading north at 20 m/s. From the car the ball appears to be heading forward at a 45 degree angle at 15 m/s. What are its vertical and horizontal velocity components wrt the car and wrt the earth?
http://h1.ripway.com/DrCherdack/Relative%20Mot%20WS%20RM9-09.doc
Here is a key correction to problem 6 from this new version that corrects the error in the old work sheet
6. A ball is thrown from a car heading north at 20 m/s. From the car the ball appears to be heading forward at a 45 degree angle at 15 m/s. What are its vertical and horizontal velocity components wrt the car and wrt the earth?
Monday, September 27, 2010
Honors Secton2
I spend my weekends grading your labs and reviewing homework. You did not pick up material from the outfolder. Starting Wednesday labs will receive -5 points for every day left in the out folder.
Sunday, September 26, 2010
AP Vector Lab
Purpose was to show graphical addition of vectors, i.e., tail to head method, worked and was commutative. We assumed, for now, that the three force vectors should cancel since there was no motion. When B+A = -C and A+B looked just like B+A and A+B+C =0 this seemed like a pretty good demonstration that tail to head worked and was commutative.
Many of you did not add vector C to vector (A+B) as requested in paragraph B. All you had to do to find A+B+C was transfer vector B so its tail lay at the head of vector A and then transfer vector C so the tail of C was at the the head of vector B, that is the vector B in its new location. The vector A+B+C was a vector starting at the origin and going to the head of vector C in its new location. It should have been very small or even zero in magnitude.
Some of you did not provide any sketches at all. You will have to do them to get a grade.
A few of you added vectors as if they were simple numbers. This is very wrong. A force of 3 N to the left plus 3 N to the right = 0N not 6 N. A force of 2 N to the northeast plus a force of 2 N to the northwest = 2.83 N to the north not 4 N north or anywhere else.
Honors Physics Topics Groups
By Tuesday have a name for your group. Something that you can start building some enthusiasm around. A simple example is the "The Magnetics" for the electricity and magnetism people, or the "The Surfers" for the ocean waves guys, or maybe this is more appropriate for the TV group. Also, start thinking about a logo. Last year two groups even made tee shirts with their logos.
Speaking of last year: Hi to Ashley, CaCarly, Amber and Neel.
Labs in General and Torque Lab
All of you should read all of this this because AP will do this lab soon.
With few if any exceptions, the purpose of a lab in our class is to test the truth of a theory or hypothesis or more than one hypotheses. It is NOT to gain experience in balancing, it is NOT to study the effects of moving a balance point , it is not to educate you or give you a feeling of accomplishment. It is to see if something, usually a pretty specific something, is true.
The reason for me requiring you to do a lab, or my purpose for you doing the lab is another matter, and may be something really sinister, such as getting a teenager to think. However this is not the purpose of the lab in itself. It is the purpose of the lab itself that you must put in your report, not any of my or your ulterior motives (which in your case may be simply to avoid getting yelled at by an irate physics teacher.)
Similarly, the conclusion must contain a direct answer as to whether or not the purpose was achieved, i.e was the truth of the hypothesis or hypotheses demonstrated. This should include a restatement of the hypothesis, hypotheses being tested.
For the torque lab, the two hypotheses being tested were
- Given the definition that torque = Ftangential x distance from point of rotation, then if the clockwise torques = the counterclockwise torques rotational equilibrium is attained,
- For calculating torque, the weight or force of gravity on an object can be taken as acting on the point which is the center of mass of that object.
Cases 1, 2 and 3 demonstrated the first hypothesis and case 5 demonstrated the first and second.
Question 1 on the torque lab asked about how the sum of the forces = 0. IT said nothing about torque. Many of you made the double mistake of saying the forces were equal on both sides of the pivot. First this was not true, the torques not the forces , were equal. Second the question was not about rotation and torques it was about force. All the weights were downward forces, why did the meter stick not accelerate downward; i.e. what was holding the meter stick up and with how much force?
Question 3 Triple beam; since you never got to use these in chem lab I'll have to explain it to most of you although congratulations to the few who did get this right.
Question 4: your answer should have had a calculation which showed the torque required from mass 3 had to be 4500 gram cm. You could then explain why this was a problem with
M3 = 50 grams and how you might solve it moving M1 or M2 or even the pivot point.
Question 6 should be answered. Write an expression for the ccw torque using 220 g and its distance from the pivot and an expression for the cw torque using 100 g and its distance from the pivot and the mass of the meter stick ( unknown so call it M3) and its distance from the pivot. Set ccw equal to cw and solve for M3. Remember distance is not position, i.e. d not equal x.
Also remember that x means position, not mass, not speed, not force, not torque.
Wednesday, September 22, 2010
Everyone Meetings
Physics Club ( the coolest club of all) meets at 7:05 in my room (506). Anyone with an interest in physics is welcome.
People who want to participate in Physics section of Science League should meet with Mr. Gilmore at 2:30 tomorrow ( Thursday) in Room 502.
People who want to participate in Physics section of Science League should meet with Mr. Gilmore at 2:30 tomorrow ( Thursday) in Room 502.
Honors : Net Force
In doing the work sheets remember that we were a little sloppy in class. Its not F = Ma it's Fnet = Ma or a + Fnet/ M. For example, if I have a 2 kg mass being pushed by a 4 N force to the north and an 8 N force to the south, the net force on it is 4 N to the south and the acceleration is 4N / 2kg = 2 m/s/s to the south.
Remember the force of gravity, i.e. the weight, = Mg and is down and has to be taken into account when figuring out what the net force is.
Remember the force of gravity, i.e. the weight, = Mg and is down and has to be taken into account when figuring out what the net force is.
Subscribe to:
Posts (Atom)